Month: August 2023

How to Repair Drywall

Drywall isn’t indestructible, and dents can result from anything from banging a doorknob to children flinging toys. Small holes and dents can be patched with a little effort and the right tools.

Drywall Repair

Large cracks, those that occur along a sagging wall, and discoloration are signs of structural problems or moisture issues that should be investigated and addressed by a professional. For professional help, contact Drywall Repair Las Vegas now!

If you have a hole in your wall, patching it before applying paint can give it a more seamless look. For a professional-looking job, square the hole off with a utility knife and then sand 4″–6″ around its perimeter with 100-grit sandpaper to smooth it down. Then, either cover the damaged area with a self-adhering drywall patch or, if studs are visible, nail or screw a new piece of drywall to them. Apply a thin coat of joint compound over the repaired surface and let it dry.

Before you cut into a wall, check for electrical cords or plumbing lines. It’s always best to work with an electrician or plumber for bigger holes. If you discover any wires or pipes, have them rerouted or disconnected before you begin repairing the hole.

You can buy a patch kit for holes about the size of a doorknob with a self-adhering mesh patch that covers the damage. However, if the hole is larger, you’ll need to score the back (brown) side of the drywall pieces at 1 inch from each edge, then peel off the brown paper to expose the white gypsum inside.

For a more professional-looking repair, you’ll need a container of pre-mixed joint compound, also known as mud, and 6-inch or 12-inch metal putty knives. Start by scraping away any jagged edges or loose particles with a utility knife, then apply the first coat of mud to the patch. Smooth it with a putty knife and let it dry, checking the time to cure indicated on the product label.

Apply additional coats as necessary until the patch is completely covered and blended with the surrounding wall, then sand it smooth and feather the edges. If you’re using an aerosol texture spray, be careful not to overspray. Overspray can damage adjacent drywall or furniture.

Most homes settle unevenly as they age, which can cause cracks in the inside corners of rooms. A common solution is to watch for movement over two or three months and fix the corner as soon as it starts to sag, or even a little before then.

Repairing Cracks

Cracks in a wall can be charming irregularities that add character to the room, or they can indicate serious structural issues that need to be addressed. It’s important to understand the difference between these, have the more serious cracks professionally assessed by a building professional to determine their root cause, and then have those problems corrected. Minor cracks, however, are typically caused by the natural settling of a house over time and can be easily patched with a few basic tools and materials found at any home improvement store.

Start by applying a 1/8-in. thick bed of patch drywall compound to the joint. Press a strip of paper tape into the compound, and then apply another coat of compound to smooth out any ridges or uneven areas. Let dry, then lightly sand the surface of the crack with 100-grit sandpaper to blend the edges of the repair.

If the crack is on a seam, carefully widen it with a utility knife, paint scraper, or chisel. This will remove any loose drywall material, and it will also allow the gap filler or compound to fill the crack properly.

When two sheets of drywall meet at an outside corner, they are joined with an L-shaped metal strip called a “corner bead.” This is nailed to the corners of the sheet and then concealed by a second layer of joint compound. Over time, the corner bead can become dented from activities such as running a vacuum cleaner over the wall, a child flinging a toy, or moving furniture.

Once you’ve widened the crack, it’s a simple matter of using aviation snips to cut off the severed section of the corner bead. Use a utility knife to remove any loose drywall. Next, lightly sand the area to smooth it before priming and painting.

While it is possible to fix these smaller cracks on your own, it is generally best to call in a professional for any crack that is wider than a quarter inch. These larger cracks can be a sign of a serious problem that needs to be addressed, and attempting to simply paper over them will likely lead to the problem worsening over time.

Repairing Nail Pops

If you find small circular areas poking out from your walls and ceiling, you have nail pops. These little bumps of drywall can crack the paint around them and are unsightly. The good news is that they’re easy to fix. Here’s how.

Drywall nails and screws work themselves loose over time as the wood framing expands and contracts with changes in humidity and season. That causes the wood fibers to lose their grip on the smooth shank of the nails and screws, causing them to come out of the wall and create a nail pop.

The best way to prevent nail pops is to use the right fastener for the job and install it correctly. That includes using the right type of screw and making sure the head isn’t too big for the hole you’re driving into. You should also avoid hitting drywall with a hammer or screwdriver too hard, which can loosen the fastener or crack the drywall.

Nail pops are a lot more common in homes built decades ago, where nails were used rather than screws. But they can be found in any home and are usually caused by subtle shifts in the foundation or wood framing.

Run your fingers over the surface of your wall to feel for nail pops. If you find one, circle it with a pencil so you can locate it later. If it’s a nail, a few light taps with a hammer should drive it back below the drywall surface. If it’s a screw, you’ll need to use a drill fitted with a #2 Phillips bit to drive it back below the surface.

Once the nail or screw is re-secured, spread some joint compound, spackle, or a mix-to-use setting compound over the heads of the nail or screw. Drag a putty knife over the surface to smooth it out, and let it dry. If you want to, you can sand it smooth with a drywall sanding sponge and then apply a new coat of primer and paint.

You can also secure a nail or screw with two drywall screws, placed an inch above and below the hole. That will replace the nail with the screws and prevent it from re-popping in the future.

Repairing damaged corners

Drywall corners are designed to create a pristine edge in the corner of your wall. However, they can get damaged from heavy impacts, such as hanging a picture or moving furniture. Fortunately, they are easy to repair with a simple joint compound.

First, remove any loose particles in the corner. Then, apply a thin layer of drywall compound, extending it to the adjacent drywall surfaces. Use a putty knife that is three to six inches wide and smooth the compound. Allow the compound to dry as per the manufacturer’s instructions.

When you are finished, sand the area with fine-grit sandpaper or a sanding sponge to smooth out any ridges and blend in the edges of the patch. Then prime and paint the patched area to match the surrounding wall surface.

Smaller holes in drywall can often be repaired using paper joint tape and a small amount of drywall compound (known in the building trades as mud). Before you apply the mud, carefully carve away any protruding pieces of drywall paper or gypsum. If they are not flattened, the mud will most likely ooze out around the edges of the hole.

As a home settles, its framing can twist, pushing the nails holding the drywall to the wall studs outward. This causes visible bulges in the drywall called nail pops. If you tap these nails back into place, they will work their way out again. To solve this problem permanently, drive a screw about an inch above and below the nail head in each location. This will anchor the drywall to the stud and prevent it from twisting in the future.

Damaged corner drywall can also be fixed by replacing the damaged corner bead. This is a relatively straightforward job, but it can be tricky if you have never replaced one before. Start by cutting out the old corner bead with a utility knife. Then, use tin snips to cut a new piece of paper-faced corner bead to replace the damaged one. Press the bead firmly onto the damaged area and apply a new coat of mud over it.

What Does a Residential Plumber Do?

Residential plumbing involves anything that has to do with the pipes inside a home. This includes everything from your water supply to your toilets.


A reliable residential plumber will be able to handle any issue that might come up, from clogged drains to leaky water heaters. They will also be able to provide routine maintenance that ensures all systems work properly. Click for more information.

A residential plumber handles plumbing tasks for homes, including houses and apartments. These plumbers typically take on new construction and renovation projects as well as repairs for existing systems in residential properties. They also work on small plumbing installations like toilets, bathtubs, and showers. The plumbing industry is competitive, so it’s important for plumbers to keep up with the latest techniques and tools. This ensures they can offer the best quality service to their customers.

In addition to installing plumbing fixtures, a residential plumber can perform other duties as needed. They may be required to inspect and test plumbing systems to determine their integrity and compliance with local building codes. They can also assist with the underground rough-in phase of a building project, which involves locating and marking the position of supply and waste pipes before they are installed in the walls and floors of the building.

The most common plumbing issues that affect homeowners include leaking faucets, clogged drains, and water heater problems. A plumber can help resolve these issues quickly to prevent further damage and costly repairs. To find a reputable plumber, you should ask friends and neighbors for recommendations, check online reviews, and compare rates before hiring someone.

A plumber must complete a formal education or training program to become licensed to work in the field. This includes a mix of classroom instruction and hands-on experience working on real plumbing projects in the field. Some education programs are offered through trade organizations, while others are offered through community colleges and technical schools. Once a plumber has completed their education, they must pass a certification exam and meet state or city licensing requirements.

Once a plumber has obtained their license, they can work independently or supervise other plumbers. They can design, plan, and install plumbing systems for both commercial and residential properties. They can also work on gas and sewer systems. They can also install and maintain appliances such as dishwashers, garbage disposals, and water heaters. In addition, they can repair and maintain heating systems, air conditioning units, and sprinkler systems.


Residential plumbers are equipped to handle any issues that may arise in a home’s plumbing system. This includes everything from unclogging drains to repairing or replacing water heaters. They are also trained to perform regular maintenance that keeps residential pipes and fixtures in top condition, reducing the likelihood of future problems like clogs or leaks.

These plumbers are also skilled at diagnosing problems and finding effective solutions. They use their knowledge of physics, mathematics, and the sciences to determine what caused a problem and how to fix it. They can also read blueprints and building specifications to understand how a plumbing system works before making any repairs.

Some plumbers specialize in specific types of plumbing work. For example, a sewage plumber will work with the pipes and sewer systems that connect homes to public water and waste treatment plants. They are experienced in using a wide range of plumbing techniques, including trenchless technology, to repair damaged pipelines. Other plumbers focus on gas pipe installation and repair. These professionals are also called gas fitters. They are familiar with installing and repairing appliances that use natural gas, such as stoves and furnaces.

The type of repair needed can also affect a plumber’s hourly rate. For instance, a residential plumber with extensive experience in troubleshooting and fixing complex plumbing issues will likely charge more than someone who fixes basic problems like leaking faucets and running toilets. Regardless of the job at hand, any plumber who is licensed by a state regulatory body should be insured and bonded in case of any damages to your property during the plumbing process.


Plumbing is the act of installing, repairing, and maintaining the pipes that deliver water in both residential and commercial spaces. This includes laying and fitting pipes for hot and cold water systems and drains, as well as inspecting sewage systems. It also involves interpreting blueprints and building specifications to draft a layout and design. Plumbers can also learn the skills to assemble pipe sections, tubing, and fittings using clamps, screws, soldering, brazing, welding equipment, and other tools.

Most cities and states require a master plumber’s license to install or repair plumbing systems in new construction or existing structures. These professionals must pass a background check and drug test and have current certifications in CPR and first aid. Some may have additional certifications in environmental compliance, quality assurance, and project management. Others specialize in specific aspects of plumbing, such as gas line installation or kitchen and bath remodeling.

A sanitary plumber is a specialist who can diagnose and repair problems in a house’s plumbing system related to sewage, toilets, bathrooms, laundry rooms, and sinks. They are often called to unclog toilets and drains, remove stains from pipes, and clean up sewer systems. They can also help you remodel your bathroom and kitchen to make them more functional and attractive.

Plumbers must have in-depth knowledge of both commercial and residential plumbing, including clogged drains, backed-up sewer lines, and leaky faucets. They must also be familiar with the plumbing codes in their area and be able to work under pressure. Additionally, they need to be able to read and interpret blueprints and schematics, as well as understand piping systems that incorporate both copper and PVC.

In addition to their plumbing expertise, a residential plumber should be able to provide customers with bundled services that include inspections and maintenance of the entire plumbing setup. This can save homeowners money in the long run, as they won’t need to book individual services when something goes wrong. This bundled service will also help residents avoid costly repairs down the road by catching issues before they worsen. For example, a clogged pipe or faulty water heater can lead to higher utility bills, so it’s important to fix them as soon as possible.


A residential plumber can help with a wide range of problems. These can include leaking faucets, toilets that don’t flush, and signs of water damage in the ceiling or walls. Most of these issues have easy solutions that homeowners can do themselves, but some require the expertise of a professional.

If a pipe is broken, the first thing that a plumber will do is shut off the water supply to the affected area. This will prevent further damage and keep the situation under control until a permanent repair can be made. After this, the plumber will check the condition of the pipe to determine what kind of repairs are needed. These may include patching, replacing sections of pipe, or using specialized techniques to ensure that the pipe is strong and secure.

Clogs are another common plumbing issue that a plumber can deal with. These can be caused by too much hair, paper products, or other insoluble materials being sent down a drain or toilet. To fix this, a plumber will typically use a drain snake or auger to break up the clog and clear it out. For more serious clogs, they may need to use chemical solutions or sewer line cleaning tools.

Water quality is also a concern for many homeowners. A plumber can install a water filter to improve the quality of a home’s drinking water. They can also troubleshoot issues with existing filters, such as if the water pressure has changed or the filter is no longer working properly.

Residential plumbers can also repair or replace a wide variety of fixtures, such as bathtubs, showers, sinks, and toilets. These may be damaged by accidents or simply by age and wear and tear. A plumber will be able to provide advice on which fixture is best for a homeowner and can install it quickly and efficiently.

A residential plumber can even take on more specialized jobs, such as unblocking and cleaning clogs in sanitary systems or installing and repairing gas lines. However, these tasks are more dangerous and should only be undertaken by a fully qualified professional.